The Drive And Programming Modes; The Drive And Programming Modes - YASKAWA FSDrive-MV1000 Instructions Manual

4.3

The Drive and Programming Modes

The drive has a Programming Mode to program the drive for operation, and a Drive Mode used to actually run the motor.
Drive Mode: In the Drive Mode, the user can start the motor and observe operation status with the monitors that are
available. Parameter settings cannot be edited or changed when in the Drive Mode.
Programming Mode: The Programming Mode allows access to edit, adjust, and verify parameters, as well as perform
Auto-Tuning. Unless set to allow a Run command, the drive will not accept a Run command when the digital operator is
in the Programming Mode.
Table 4.4 describes the functions accessible by pressing the
Note: To allow the drive to run the motor while in the Programming Mode, set b1-08 to 1.
Mode
Drive Mode
(Operation/operation status
monitor of the motor)
Programming Mode
(Parameter setting)
YASKAWA ELECTRIC EZZ010928 FSDrive-MV1000 Instructions
Table 4.4 Modes
Contents
Frequency Reference
Monitor Display
Verify Menu
Setup Group
Parameter Setting Mode
Auto-Tuning Mode

4.3 The Drive and Programming Modes

⋅
keys of the digital operator.
Key LCD Display
- MODE -
U1-01= 0.00Hz
U1-02= 0.00Hz
U1-03= 0.0A
JOG
- MODE -
U1-01= 0.00Hz
U1-02= 0.00Hz
U1-03= 0.0A
JOG
- MODE -
- MODE -
- MODE -
- MODE -
DRV Rdy
FREF(OPR)
LSEQ
LREF
FWD FWD/REV
DRV Rdy
Monitor Menu
LSEQ
LREF
FWD FWD/REV
PRG
Modified Consts
Modified
X Parameters
HELP FWD DATA
PRG
Quick Setting
HELP FWD
DATA
PRG
Programming
HELP FWD
DATA
PRG
Auto-Tuning
AUTO
HELP FWD DATA
4
83