The Drive And Programming Modes; The Drive And Programming Modes - YASKAWA FSDrive-MV1000 Series Instructions For Use Manual

4.3

The Drive and Programming Modes

The drive has a Drive mode to operate the motor and a Programming Mode to edit parameter settings.
Drive Mode: In Drive Mode, the user can start the motor and observe operation status with the available monitors.
Parameter settings cannot be edited or changed when in the Drive Mode.
Programming Mode: In Programming Mode the user can edit and verify parameter settings and perform Auto-Tuning.
When the drive is in Programming Mode it will not accept a Run command unless b1-08 is set to 1.
Table 4.4 describes the functions accessible by pressing the
Mode
Drive Mode
(Operation/operation status
monitor of the motor)
Programming Mode
(Parameter setting)
YASKAWA ELECTRIC TOEP C710687 02B FSDrive-MV1000 Instructions
Table 4.4 Modes
Contents
Frequency Reference
Monitor Display
Verify Menu
Setup Group
Parameter Setting Mode
Auto-Tuning Mode

4.3 The Drive and Programming Modes

⋅
keys of the digital operator.
Key LCD Display
- MODE - PRG
Modified Consts
Modified
X Parameters
HELP DATA
FWD
- MODE - PRG
Quick Setting
HELP
DATA
FWD
- MODE - PRG
Programming
HELP
DATA
FWD
- MODE - PRG
Auto-Tuning
AUTO
HELP DATA
FWD
4
113