Access Management Commands - D-Link Dis-200G Series Cli Reference Manual

3.

Access Management Commands

3-1 ip http secure-server
This command is used to enable the HTTPS server. Use the no form of this
command to disable the HTTPS server function.
ip http secure-server
no ip http secure-server
Parameters
None.
Default
By default, this option is disabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 15
Usage Guideline
This command enables the HTTPS server function.
Example
This example shows how to enable the HTTPS server function.
Switch# configure terminal
Switch(config)# ip http secure-server
Switch(config)#
3-2 show terminal
This command is used to obtain information about the terminal configuration parameter settings for
the current terminal line. Use this command in any EXEC mode or any configuration mode.
show terminal
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
15