Huawei Quidway S8500 Series Command Manual page 23

Command Manual – Getting Started
Quidway S8500 Series Routing Switches
word, can be input. The text starts and ends with the first character. After inputting the
end character, press the <Enter> key to exit the interact process.
Description
Use the header command to configure to display header when user login.
Use the undo header command to configure not to display the header.
When the user logs in to the switch, if a connection is activated, the login header will be
displayed. After the user successfully logs in to the switch, the shell header will be
displayed.
Note that if you press <Enter> after typing any of the three keywords shell, login and
incoming in the command, then what you type after the word header is the contents of
the login information, instead of identifying header type.
You can judge whether the initial character can be used as the header contents this
way:
1) If there is only one character in the first line and it is used as the identifier, this
initial character pairs with the ending character and is not header content.
2) If there are many characters in the first line but the initial and ending characters
are different, this initial character pairs with the ending character and is header
content.
3) Texts are input in multiple lines, there are many characters in the first line and the
initial character is identical with the ending character, this initial character is not
header content).
Example
# Configure the header of setting up a session.
Mode 1: Input in one line
<Quidway>system-view
System View: return to User View with Ctrl+Z.
[Quidway] header shell %SHELL: Hello! Welcome% (The starting and ending
characters must be the same, and press the <Enter> key to finish a line)
When you log in to the switch again, the terminal displays the configured session
establishment title.
[Quidway] quit
<Quidway> quit
Please press ENTER
SHELL: Hello! Welcome (The initial character "%" is not the header contents)
<Quidway>
Mode 2: Input in several lines
[Quidway] header shell % SHELL: (After you pressing the <Enter> key, the system prompts the
following message:)
Chapter 1 Commands Used to Log in to Switch
Huawei Technologies Proprietary
1-12