Command Manual - Multicast
Quidway S2000 Series Ethernet Switches
Received error IGMP packet(s) number:0.
Sent IGMP specific query packet(s) number:0.
2.1.4 igmp-snooping
Syntax
igmp-snooping { enable | disable }
undo igmp-snooping
View
System view
Parameter
enable: Enable IGMP Snooping.
disable: Disables IGMP Snooping; By default, the switch disables IGMP Snooping
feature.
Description
Using igmp-snooping command, you can enable/disable IGMP Snooping. Using
undo igmp-snooping command, you can restore the default setting.
This command is used to enable or disable IGMP Snooping on the switch.
Example
# Enable IGMP Snooping.
[Quidway] igmp-snooping enable
2.1.5 igmp-snooping host-aging-time
Syntax
igmp-snooping host-aging-time seconds
undo igmp-snooping host-aging-time
View
System view
Chapter 2 IGMP Snooping Configuration Commands
2-4