Command Manual – Getting Started
Quidway S8500 Series Routing Switches
<Quidway>system-view
System View: return to User View with Ctrl+Z.
[Quidway] user-interface vty 0
[Quidway-ui-vty0] user privilege level 0
# After you telnet from VTY 0 user interface to the switch, you will view the terminal only
displays commands at level 0.
<Quidway> ?
User view commands:
debugging
language-mode
ping
quit
super
telnet
tracert
undo
Chapter 1 Commands Used to Log in to Switch
Enable system debugging functions
Specify the language environment
Ping function
Exit from current command view
Privilege current user a specified priority level
Establish one TELNET connection
Trace route function
Cancel current setting
Huawei Technologies Proprietary
1-31