Huawei Quidway S8500 Series Command Manual page 19

Command Manual – Getting Started
Quidway S8500 Series Routing Switches
Example
# Display the relational information of user interface 0.
<Quidway> display user-interface 0
Idx Type
+ 0 CON 0
+ : Current user-interface is active.
F : Current user-interface is active and work in async mode.
Idx : Absolute index of user-interface.
Type : Type and relative index of user-interface.
Privi: The privilege of user-interface.
Auth : The authentication mode of user-interface.
Int : The physical location of UIs.
A: Authenticate use AAA.
N: Current UI need not authentication.
P: Authenticate use current UI's password.
Table 1-1 Description on the fields of the display user-interface command
Field
+
F
Idx
Type
Tx/Rx
Modem
Privi
Auth
Int
# Display the summary information of user interface 0.
<Quidway> display user-interface 0 summary
1 character mode users.
1 total UIs in use.
UI's name: con0
Tx/Rx Modem Privi Auth
9600 -
Current user interface is in use
Current user interface is in use and work in asynchronous mode
Absolute index of user interface
Type and relative index of user interface
User interface speed
Modem operation mode
Which levels of commands can be used after logging in from the user
interface
User interface authentication method
The physical location of user interfaces
0: U
Huawei Technologies Proprietary
Chapter 1 Commands Used to Log in to Switch
Int
3 N -
Description
(U)
1-8