Process Bus Zones Mode - ABB RELION REB500 Engineering Manual

Section 5
Configuration
Button
B5
B6
B7
B8
B9
B10
B11
B12
B13
B14
5.5.2

Process bus zones mode

22
Functions
Import a Bay Model from the Bay Model database to the left side of the
selected bay. This button is active only, if the Model Mode (see S2) is
selected.
Import a Bay Model from the Bay Model database to the right side of the
selected bay. This button is active only if the Model Mode (see S2) is
selected.
Import a Bay Model from the Bay Model database to the right end side of
the busbar. This button is active only if the Model Mode (see S2) is
selected.
Remove the selected Bay Model or Bay Figure from the single-line
diagram. This button is active only if the Model Mode (see S2) is selected.
Interconnect two selected adjacent busbar-connectors.
(for special applications only)
Interconnect two selected distant busbar-connectors with →← reference.
(for special applications only, for example, ring busbars)
Interconnect two selected distant busbar-connectors with ←→ reference.
(for special applications only, for example, ring busbars)
Remove interconnection between two selected busbar-connectors.
(for special applications only)
Make the invisible caption of one or several selected busbar-connectors
visible.
Make the visible caption of one or several selected busbar-connectors
invisible
See Section 9.31 and Section
© 2020 Hitachi Power Grids. All rights reserved
9.32.
Distributed busbar protection REB500
1MRK 511 452-UUS Rev. A
GUID-C405A422-0A43-4B82-8EC8-405520BB4886 v3
Engineering manual