Honda NSX-T 1998 Manual page 1451

Main Menu
A/T Gear Position Switch Test
1. Remove the front console, then disconnect the 12P
connector from the A/T gear position switch.
2. Check for continuity between the terminals in each
switch position according to the table.
Move the lever back and forth at each position
without touching the push button, and check for
continuity within the range of free play of the
shift lever.
If there is no continuity within the range of free
play, adjust the position of the A/T gear position
switch (see page 23-162).
12P CONNECTOR
View from wire side.
A/T Gear Position Switch (For cruise control)
Terminal
Position
Table of Contents
A/T GEAR POSITION SWITCH
5
8
23-311