Honda NSX-T 1998 Manual page 1476

Main Menu
Seat Belt Tensioner Handling and Storage
Do not try disassemble the seat belt tensioner assem-
bly. It has no serviceable parts. Once seat belt tensioner
has been operated, it cannot be repaired or reused.
SHORT
CONNECTOR
(RED)
WEBBING
Store the removed seat belt tensioner assembly on a
secure flat surface away from any high heat source
(exceeding 212°F/100°C) and free of any oil, grease,
detergent or water.
Table of Contents
CYLINDER
POWER
SOURCE
SEAT BELT
TENSIONER
ASSEMBLY
Follow these precautions below during removal of a
tensioner.
— Install its short connector (RED) as soon as the
tensioner connector is disconnected.
— Use only the test equipment specified in the
Electrical section.
— Do not disassemble the tensioner or allow any im-
pact to it.
For proper disposal see page 24-37.