Honda NSX-T 1998 Manual page 1437

Main Menu
3. Remove the tilt cover.
4. Remove the steering column covers.
NOTE: Be careful not to damage the steering col-
umn covers.
UPPER COVER
LOWER COVER
Table of Contents
TILT COVER
5. Disconnect the 20P, 4P and 5P connectors.
CAUTION: Be careful not to damage the SRS wire
harness.
6. Remove the six screws, then remove the windshield
wiper-cruise control switch assembly.
WINDSHIELD WIPER-CRUISE CONTROL
SWITCH ASSEMBLY
7. Install in the reverse order of removal.
5P CONNECTOR
4P
CONNECTOR
20P
CONNECTOR