Table of Contents
Advertisement
Main Menu
Immobilizer System
Immobilizer Receiver Replacement
1.
Remove the dashboard lower cover and dashboard
lower pad (see page 23-73).
2.
Remove the dashboard brace (see page 23-73).
3.
Disconnect the 3P connector from the immobilizer
control unit. This harness is shielded and serves as
a communication link; be careful not to damage it.
4.
Remove the screw from the immobilizer receiver,
then remove the receiver from the ignition key
cylinder.
IMMOBILIZER RECEIVER
IGNITION KEY
CYLINDER
5.
Install the new immobilizer receiver in the reverse
order of removal.
6.
After replacement, check the immobilizer system.
Table of Contents
Advertisement
Chapters
Table of Contents
