Injector Rail - Injectors: Removal - Refitting - Renault Laguna III Manual

Injector rail - Injectors: Removal - Refitting
F4R
Tightening torquesm
injector rail bolts
clamp of the intercooler
air inlet pipe on the tur-
bocharger end
IMPORTANT
During this operation, be sure to:
- refrain from smoking or bringing red hot objects
close to the working area,
- be careful of fuel splashes when disconnecting the
union.
IMPORTANT
Wear leaktight gloves (Nitrile type) for this opera-
tion.
IMPORTANT
Wear goggles with side protectors for this opera-
tion.
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Remove the front engine cover.
a Disconnect the battery (see Battery: Removal - Re-
fitting) (80A, Battery).
PETROL INJECTION
10 Nm
5.5 N.m
17B-39
a Loosen the clip (1) on the air pipe at the intercooler
inlet at the turbocharger end.
a Remove the bolt (2) on the intercooler air inlet pipe.
a Disconnect the intercooler air inlet pipe on the turbo-
charger side.
a Remove the intercooler inlet air pipe.
17B
129723