Exhaust Gas Recirculation Rigid Pipe: Removal - Refitting - Renault Laguna III Manual

Exhaust gas recirculation rigid pipe: Removal - Refitting
M9R, and 742 or 744 or 746 or 748
Tightening torquesm
air filter box air outlet
pipe clip
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 415, 02A, Lifting equip-
ment).
a Remove:
- the battery (see Battery: Removal - Refitting)
(MR 415, 80A, Battery),
- the battery tray (see Battery tray: Removal - Re-
fitting) (MR 415, 80A, Battery),
- the air filter box (see 12A, Fuel mixture, Air filter
unit: Removal - Refitting, page 12A-13) .
a Unclip:
- the turbocharger control solenoid valve pipe on the
air filter box air outlet pipe,
- the air flowmeter wiring on the air filter box air outlet
pipe.
a Disconnect:
- the oil vapour rebreathing pipe to the oil decanter,
- the vacuum pipe to the vacuum pump.
a Loosen the air filter box air outlet pipe clip on the tur-
bocharger side.
a Remove:
- the air filter box air outlet pipe,
- the engine undertray bolts,
- the engine undertray.
a Drain the cooling system (see 19A, Cooling, Cool-
ing system: Draining - Refilling, page 19A-16) .
a Remove the water chamber (see 19A, Cooling, Wa-
ter chamber: Removal - Refitting, page 19A-100) .
ANTIPOLLUTION
5.5 Nm
14A-62
a Remove:
- the bolts (1) from the exhaust gas recirculation rigid
pipe heat shield,
- the heat shield from the exhaust gas recirculation
solenoid valve,
- the nut from the engine wiring bracket,
- the engine wiring bracket.
14A
123600