MAPD Task 1: Setting the MAPD Clock
MAPD Task 1: Setting the
MAPD Clock
The objective of this task is set the MAPD system time, date and time zone. For a
complete description of the Set System Time and Date screen see
Time and Date" on page
Procedure to Set the MAPD Clock
This procedure assumes that you have logged into the MAPD system and are at
the Main Menu (see
System" on page
Follow these steps to set the MAPD clock.
1. From the Main Menu, select 4. Maintenance
The System displays the Maintenance Menu.
2. From the Maintenance Menu, select 2. Set System Time and Date .
The system displays the Maintenance, Set System Time and Date screen.
Time: __:__
This line is used to provide abbreviated help on the currently selected field.
CANCEL
REFRESH
Screen 3-5. MAPD Maintenance, Set System Time and Date
3. In the Time: field, enter the time of day in hours and minutes (hh:mm),
based on a 24-hour clock. For example, 14:00 (for 2:00 p.m.).
4-49.
"Task 1: Basic Administration — Logging in to the MAPD
3-6.)
Maintenance
Set System Time and Date
Month: __
Standard Timezone Information
ST Name:
Offset Time:
Direction (E/W): _
Daylight Savings Timezone Information
DST Name:
ENTER
CLEAR
Day: __
Year: ____
__________
__:__
___________
HELP
Issue 3 May 2002
"Set System
3-9
Need help?
Do you have a question about the DEFINITY and is the answer not in the manual?
Questions and answers