List Trace - Avaya S8700 Maintenance Manual

Maintenance Commands

list trace

Use this command to troubleshoot misdirected calls, trunking/routing problems,
and call denials. This command allows you to view the Virtual Path Identifier (VPI)
and Virtual Channel Identifier (VCI) data. The following qualifiers are available:
list trace station
list trace tac
list trace attendant
list trace data-module
list trace previous
Table 7-33. list trace command parameters
Action/Object Qualifier
list trace station ext
[/a]
tac tac#
attendant
data-
module
previous
list trace station
Use this command to check the VPI.VCI data for a specified station ( list trace
station extension ). The command syntax for ATM-specific trace data is:
list trace station xxxxx/a where xxxxx is the station number, and /a
means that you are requesting ATM-specific data.
Screen 7-12
Multi-Connect configuration. Use the field descriptions to interpret this report.
(The S8700 IP Connect does not support ATM -specific trace data.)
7-212 Issue 1 May 2002
Qualifier Description
Traces calls originating
from and terminating to a
specific station
Traces calls entering and
leaving the server via a
trunk group
Traces calls to and from
the attendant extension.
Traces calls to and from
data modules
Shows the results of the
previous trace
shows VPI.VCI data for a successful 2-party call setup for an S8700
Permissions Defaults
init
inads
craft
customer
555-233-143
Feature
Interactions