Agilent Technologies X Series User Manual page 54

Table 3-1
SCPI Command
SYSTem:COMMunicate:GPIB[:SELF]:RTERmi
nator LFEOI|EOI
SYSTem:DATE
SYSTem:DISPlay:FPANel ON | OFF
SYSTem:DISPlay:UPDate
SYSTem:ERRor?
SYSTem:ERRor:LIST?
SYSTem:ERRor:CLEar:ALL
SYSTem:PRESet
SYSTem:TIME
SYSTem:VERSion
TRACe<1|2>[:DATA] TRACE1 | TRACE2 |
TRACE3 | SPURious | ABITstream | PWCDp |
CTABle, <block> | <numeric_value>
TRACe<1|2>:IQ:DATA
TRACe<1|2>:IQ:SET <filter
type>,<rbw>,<sample rate>,<trigger
source>,<trigger slope>,<pretrigger samples>,<#
of samples>
TRACe<1|2>:IQ:SRATe 15.625kHz to 32MHz
TRACe:IQ:STATe ON | OFF
TRIGger<1|2>[:SEQuence]:SOURce
TRIGger<1|2>[:SEQuence]:LEVel:IFPower –30
to –10DBM
TRIGger<1|2>[:SEQuence]:LEVel:RFPower
<real>
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
SCPI Commands Summary Table
Compatible SCPI Commands
Corresponding Support
Model
FSE/FSP/FSU Accepted
FSE/FSP/FSU Yes
FSP/FSU Yes
FSE/FSP/FSU Accepted
FSE/FSP/FSU Yes
FSP/FSU Accepted
FSP/FSU Accepted
FSE/FSP/FSU Yes
FSE/FSP/FSU Yes
FSE/FSP/FSU Yes
FSE/FSP/FSU Yes
FSP/FSU Yes
FSP/FSU Yes
FSP/FSU Yes
FSP/FSU Yes
FSE/FSP/FSU Yes
FSP/FSU Accepted
FSP/FSU Yes
SCPI Summary Table
Notes
Date display format is, for
example, 2010,5,10
Support the parameter list
as:
TRACe[1][:DATA]
TRACE1|TRACE2|TRACE3|
TRACE4|TRACE5|TRACE6,
<data>
where <data> can be
ASCII, REAL or INTeger.
The following source
selections are not
supported: IFPower, TV,
AF, FM, AM and PM.
Min = –200 dBm
Max = 100 dBm
53