Compatible SCPI Commands
Supported SCPI Commands
TRIGger<1|2>[:SEQuence]:SLOPe
Sets the trigger signal slope to positive or negative.
The trigger slope setting applies to all trigger sources.
Remote Command
Example
Remote Command Notes
Preset
State Saved
Range
164
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
:TRIGger[1][:SEQuence]:SLOPe POSitive|NEGative
:TRIGger[1][:SEQuence]:SLOPe?
TRIG:SLOP NEG
FSE, FSP, FSU
POSitive
Saved in instrument state.
POSitive|NEGative