Compatible SCPI Commands
Supported SCPI Commands
This mode supports the following unit parameters: DBM | DBUV | DBMV | DBUA | V | A | W.
The query returns the current unit selection.
Remote Command
Example
Remote Command Notes
Preset
State Saved
Range
Backward Compatibility
dBm
Sets the unit for the selected amplitude scale (log/lin) to dBm.
Remote Command Example:
dBmV
Sets the unit for the selected amplitude scale (log/lin) to dBmV.
Remote Command Example:
W
Sets the unit for the selected amplitude scale (log/lin) to Watt.
Remote Command Example:
V
Sets the unit for the selected amplitude scale (log/lin) to Volt.
Remote Command Example:
A
Sets the unit for the selected amplitude scale (log/lin) to Ampere.
Remote Command Example:
104
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
:CALCulate[1]:UNIT:POWer DBM|DBUV|DBMV|DBUA|V|A|W
:CALCulate[1]:UNIT:POWer?
CALC:UNIT:POW DBM
FSE, FSP, FSU
DBM
Saved in instrument state.
DBM | DBUV | DBMV | DBUA | V | A | W
UNIT[1]|2:POWer
UNIT:POW DBM
UNIT:POW DBMV
UNIT:POW W
UNIT:POW V
UNIT:POW A