Mmemory:rdirectory <Directory_Name; Mmemory:store<1|2>:State 1,<File_Name; Mmemory:store<1|2>:Trace <1; Mmemory:clear:state 1,<File_Name - Agilent Technologies X Series User Manual

Compatible SCPI Commands
Supported SCPI Commands
The query returns the current value of this setting.
Remote Command
Example
Remote Command Notes
MMEMory:RDIRectory <directory_name>
Deletes the directory specified by <directory_name>.
Remote Command
Example
Remote Command Notes
MMEMory:STORe<1|2>:STATe 1,<file_name>
Stores the current analyzer state settings in a set of files. The files use the specified file name, but have
differing extensions..
Remote Command
Example
Remote Command Notes
MMEMory:STORe<1|2>:TRACe <1...6>,<file_name>
Stores the specified trace (1...6) in an ASCII-format file specified by <file_name>.
Remote Command
Example
Remote Command Notes
MMEMory:CLEar:STATe 1,<file_name>
Clears the analyzer setting specified by <file_name>.
This command is accepted, but takes no action and reports no error.
Remote Command
Example
Remote Command Notes
126
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
:MMEMory:NAME <string >
:MMEMory:NAME?
:MMEM:NAME '1.PNG'
:MMEM:NAME?
FSE, FSP, FSU
:MMEMory:RDIRectory <string>
:MMEM:RDIR 'C:\Test'
FSE, FSP, FSU
:MMEMory:STORe:STATe 1,<string>
:MMEM:STORe:STAT 1,'myState.state'
FSE, FSP, FSU
:MMEMory:STORe:TRACe
TRACE1|TRACE2|TRACE3|TRACE4|TRACE5|TRACE6|ALL,<string>
:MMEM:STORe:TRACe TRACe1,'Trace1.trace'
FSE, FSP, FSU
:MMEMory:CLEar:STATe 1,<string>
:MMEM:CLE:STAT 1,'Trace1.trace'
FSE, FSP, FSU