Agilent Technologies X Series User Manual page 49

Compatible SCPI Commands
SCPI Summary Table
Table 3-1
SCPI Command
MMEMory:DATA <file_name>[,<block data>]
MMEMory:DELete <file_name>
MMEMory:INITialize <msus>
MMEMory:LOAD:STATe 1,<file_name>
MMEMory:LOAD:AUTO 1,<file_name>
MMEMory:MDIRectory <directory_name>
MMEMory:MOVE
<file_source>,<file_destination>
MMEMory:MSIS <device>
MMEMory:NAME <file_name>
MMEMory:RDIRectory <directory_name>
MMEMory:STORe<1|2>:STATe 1,<file_name>
MMEMory:STORe<1|2>:TRACe 1 to
3,<file_name>
MMEMory:CLEar:STATe 1,<file_name>
MMEMory:CLEar:ALL
MMEMory:SELect[:ITEM]:HWSettings ON |
OFF
MMEMory:SELect[:ITEM]:TRACe[:ACTive]
ON | OFF
MMEMory:SELect[:ITEM]:LINes:ALL ON |
OFF
MMEMory:SELect[:ITEM]:SCData ON | OFF
MMEMory:SELect[:ITEM]:TRANsducer:ALL
ON | OFF
MMEMory:SELect[:ITEM]:ALL
MMEMory:SELect[:ITEM]:NONE
48
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
SCPI Commands Summary Table
Corresponding Support
Model
FSE/FSP/FSU Yes
FSE/FSP/FSU Yes
FSE/FSP/FSU Accepted
FSE/FSP/FSU Yes
FSE/FSP/FSU Yes
FSE/FSP/FSU Yes
FSE/FSP/FSU Yes
FSE/FSP/FSU Accepted
FSE/FSP/FSU Yes
FSE/FSP/FSU Yes
FSE/FSP/FSU Yes
FSE/FSP/FSU Yes
FSE/FSP/FSU Accepted
FSE/FSP/FSU Accepted
FSE/FSP/FSU Accepted
FSE/FSP/FSU Accepted
FSE/FSP/FSU Accepted
FSE/FSP/FSU Accepted
FSE/FSP/FSU Accepted
FSE/FSP/FSU Accepted
FSE/FSP/FSU Accepted
Notes
Only support "*.png" files.
Agilent supports TRACE1
| TRACE2 | TRACE3 |
TRACE4 | TRACE5 |
TRACE6 | ALL.
Do not support Split Screen
(screen A or screen B).
The following
MMEM:SEL commands
related to printer settings
are accepted, but take no
action.