Mode Selection
NOTE
To invoke SCPI Language Compatibility mode, enter either of the following commands
:INST SCPILC
:INST:NSELect 270
Key Path
Remote Command
Mode Setup
Allows you to adjust the Mode Setup settings.
Key Path
Initial S/W Revision
Compatibility Mode
The command allows you to set the model you want to emulate.
The query returns the model currently being emulated.
This setting affects the response string of "*IDN?", and the entire SCPI tree, according to the current
selection.
Key Path
Remote Command
Example
State Saved
1. After changing into or out of SCPI Language Compatibility mode, allow seconds of delay before sending subse-
quent commands.
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
Supported SCPI Commands
When Option N9062A–2FP or W9062A-2FP is licensed, the SCPI Language
Compatibility mode is available.
Front-panel key
:INSTrument[:SELect] SCPILC
:INSTrument:NSELect 270
Front-panel key
A.06.00
Mode Setup
[:SENSe]:RLC:TYPE FSE|FSP|FSU
[:SENSe]:RLC:TYPE?
SENS:RLC:TYPE FSU
RLC:TYPE?
Saved in instrument state.
Compatible SCPI Commands
Supported SCPI Commands
1
:
57