Front Panel Operations
Selecting SCPI Language Compatibility Mode
NOTE
To select the SCPI Language Compatibility mode, press the
front panel and then select the
the signal analyzer, then use the More button to find the
Figure 2-1
Figure 2-1
Alternatively, you can select this mode using following SCPI commands.
Key Path:
Remote Command
Initial S/W Revision:
28
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
Selecting SCPI Language Compatibility Mode
Option N9062A-2FP or W9062A-2FP is required to use the SCPI Language
Compatibility mode.
SCPI Language Compatibility
is an example mode menu map showing the N9062A/W9062A application installed.
Example Mode Menu Map for X-Series Analyzers
Front-panel key
:INST SCPIRLC
:INST:NSELect 270
A.06.00 or later
hardkey on the X-Series analyzer
Mode
mode. If there are more than six modes on
SCPI Language Compatibility
mode selection.