Mmemory:clear:all; Mmemory:select[:Item]:Hwsettings On | Off; Mmemory:select[:Item]:Trace[:Active] On | Off; Mmemory:select[:Item]:Lines:all On | Off - Agilent Technologies X Series User Manual

MMEMory:CLEar:ALL

Clears all analyzer settings in the current directory.
This command is accepted, but takes no action and reports no error.
Remote Command
Example
Remote Command Notes

MMEMory:SELect[:ITEM]:HWSettings ON | OFF

This command is accepted, but takes no action and reports no error.
Remote Command
Example
Remote Command Notes
Preset
State Saved

MMEMory:SELect[:ITEM]:TRACe[:ACTive] ON | OFF

This command is accepted, but takes no action and reports no error.
Remote Command
Example
Remote Command Notes
Preset
State Saved

MMEMory:SELect[:ITEM]:LINes:ALL ON | OFF

This command is accepted, but takes no action and reports no error.
Remote Command
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
:MMEMory:CLEar:ALL
:MMEM:CLE:ALL
FSE, FSP, FSU
:MMEMory:SELect[:ITEM]:HWSettings ON|OFF|1|0
:MMEMory:SELect[:ITEM]:HWSettings?
MMEM:SEL:HWS OFF
MMEM:SEL:HWS?
FSE, FSP, FSU
On
Saved in instrument state.
:MMEMory:SELect[:ITEM]:TRACe[:ACTive] ON|OFF|1|0
:MMEMory:SELect[:ITEM]:TRACe[:ACTive]?
MMEM:SEL:TRAC OFF
MMEM:SEL:TRAC?
FSE, FSP, FSU
OFF
Saved in instrument state.
:MMEMory:SELect[:ITEM]:LINes:ALL ON|OFF|1|0
:MMEMory:SELect[:ITEM]:LINes:ALL?
Compatible SCPI Commands
Supported SCPI Commands
127