This mode supports ACPower, CPOWer, MCACpower, OBANdwidth and OBWidth.
Remote Command
Example
Remote Command Notes
CALCulate<1|2>:MARKer<1...4>:FUNCtion:POWer:RESult:PHZ ON | OFF
The command switches the query response for power measurement results between absolute values
(OFF) and output referred to measurement bandwidth (ON).
The query returns the current state of this setting.
Remote Command
Example
Remote Command Notes
Preset
State Saved
CALCulate:STATistics Subsystem
The CALCulate:STATistics subsystem controls the statistical measurement functionality.
CALCulate:STATistics:APD[:STATe] ON | OFF
This command is accepted, but takes no action and reports no error.
Remote Command
Example
Remote Command Notes
Preset
State Saved
CALCulate:STATistics:CCDF[:STATe] ON | OFF
The command activates or deactivates measurement of the complementary cumulative distribution
function (CCDF).
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
CALCulate[1]:MARKer[1]|2|3|4:FUNCtion:POWer:RESult?
ACPower|CPOWer|MCACpower|OBANdwidth|OBWidth|CN|CN0
CALC:MARK:FUNC:POW:RES? OBW
FSE, FSP, FSU
:CALCulate[1]:MARKer[1]|2|3|4:FUNCtion:POWer:RESult:PHZ
ON|OFF|1|0
:CALCulate[1]:MARKer[1]|2|3|4:FUNCtion:POWer:RESult:PHZ
?
CALC:MARK:FUNC:POW:RES:PHZ OFF
CALC:MARK:FUNC:POW:RES:PHZ?
FSP, FSU
OFF
Saved in instrument state.
:CALCulate:STATistics:APD:STATe ON|OFF|1|0
:CALCulate:STATistics:APD:STATe?
CALC:STAT:APD:STAT ON
FSP, FSU
OFF
Saved in instrument state.
Compatible SCPI Commands
Supported SCPI Commands
97