[Sense<1|2>:]Sweep:egate:length 0 To 100 S; [Sense<1|2>:]Sweep:egate:source External | Ifpower | Rfpower; [Sense<1|2>:]Sweep:points 125 To 8001 - Agilent Technologies X Series User Manual

Max
[SENSe<1|2>:]SWEep:EGATe:LENGth 0 to 100 s
For edge triggering, specifies the time interval during which the instrument sweeps.
Remote Command
Example
Remote Command Notes
Preset
State Saved
Min
Max
[SENSe<1|2>:]SWEep:EGATe:SOURce EXTernal | IFPower | RFPower
Switches between an external gate signal and an IF power signal as the signal source for the gate mode.
Remote Command
Example
Remote Command Notes
Preset
Range
[SENSe<1|2>:]SWEep:POINts 125 to 8001
Specifies the number of measurement points for one sweep run.
Remote Command
Example
Remote Command Notes
Preset
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
100s
[:SENSe]:SWEep:EGATe:LENGth <time>
[:SENSe]:SWEep:EGATe:LENGthË7O
SWE:EGAT:LENG 1
SWE:EGAT:LENG?
FSE, FSP, FSU
1.25e–7
Saved in instrument state.
0
100s
[:SENSe]:SWEep:EGATe:SOURce EXTernal|IFPower|RFPower
[:SENSe]:SWEep:EGATe:SOURce?
SENS:SWE:EGAT:SOUR EXT
SENS:SWE:EGAT:SOUR?
FSE, FSP, FSU
EXTernal
EXTernal | IFPower | RFPower
[:SENSe]:SWEep:POINts <integer>
[:SENSe]:SWEep:POINts?
SWE:POIN 251
SWE:POIN?
FSP, FSU
FSP: 501
FSU: 625
Compatible SCPI Commands
Supported SCPI Commands
151