R&S Fse; R&S Fsp; R&S Fsu - Agilent Technologies X Series User Manual

Alternatively, you can select the desired compatibility mode using the following SCPI command.
Key Path:
Remote Command
Example
Preset
State Saved
Range
Notes
Initial S/W Revision:
R&S FSE
Selects emulation of FSE.
Key Path:
Example:
Initial S/W Revision:
R&S FSP
Selects emulation of FSP.
Key Path:
Example:
Initial S/W Revision:
R&S FSU
Selects emulation of FSU.
Key Path:
Example:
Initial S/W Revision:
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
Mode Setup
[:SENSe]:RLC:TYPE FSE|FSP|FSU
[:SENSe]:RLC:TYPE?
RLC:TYPE FSU
RLC:TYPE?
FSP
Saved in instrument state.
FSE|FSP|FSU
If you don't install the N9062A-2FP or W9062A-2FP license,
Language Compatibility mode is not available.
A.06.00 or later
Mode Setup, Compatibility Model
RLC:TYPE FSE
A.06.00 or later
Mode Setup, Compatibility Model
RLC:TYPE FSP
A.06.00 or later
Mode Setup, Compatibility Model
RLC:TYPE FSU
A.06.00 or later
Front Panel Operations
Mode Setup
SCPI
31