Agilent Technologies X Series User Manual page 47

Compatible SCPI Commands
SCPI Summary Table
Table 3-1
SCPI Command
DISPlay[:WINDow<1|2>]:TRACe<1 to
3>:Y[:SCALe] 10dB to 200dB
DISPlay[:WINDow<1|2>]:TRACe<1 to
3>:Y[:SCALe]:MODE ABSolute | RELativ
DISPlay[:WINDow<1|2>]:TRACe<1 to
3>:Y[:SCALe]:RLEVel
DISPlay[:WINDow<1|2>]:TRACe<1 to
3>:Y[:SCALe]:RLEVel:OFFSet
DISPlay[:WINDow<1|2>]:TRACe<1 to
3>:Y[:SCALe]:PDIVision
DISPlay[:WINDow<1|2>]:TRACe<1 to
3>:Y:SPACing LINear | LOGarithmic| LDB
DISPlay[:WINDow<1|2>]:TRACe<1 to
3>:MODE WRITe | VIEW | AVERage |
MAXHold | MINHold
DISPlay[:WINDow<1|2>]:TRACe<1 to
3>[:STATe] ON | OFF
FORMat[:DATA]
HCOPy:ABORt
HCOPy:CMAP<1 to 26>:DEFault1|2|3
HCOPy:CMAP<1 to 26>:HSL
<hue>,<sat>,<lum>
HCOPy:CMAP<1 to 26>:PDEFined BLACk |
BLUE | BROWn | GREen | CYAN | RED |
MAGenta | YELLow | WHITe | DGRAy | LGRAy
| LBLUe | LGREen | LCYan | LRED | LMAGenta
HCOPy:DESTination<1|2> <string>
HCOPy:DEVice:COLor ON|OFF
46
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
SCPI Commands Summary Table
Corresponding Support
Model
FSE/FSP/FSU Yes
FSE/FSP/FSU Accepted
FSE/FSP Yes
FSE/FSP/FSU Yes
FSE/FSP/FSU Yes
FSE/FSP/FSU Yes
FSE/FSP/FSU Yes
FSE/FSP/FSU Yes
FSE/FSP/FSU Yes
FSE/FSP/FSU Yes
FSP/FSU Accepted
FSP/FSU Accepted
FSP/FSU Accepted
FSE/FSP/FSU Accepted
FSE/FSP/FSU Accepted
Notes
The only unit supported is
DB.
Do not support the
parameter option LDB.
The supported formats are
X-Series specific:
ASC,8
REAL,32
REAL,64
and INT,32
HCOPy functions are not
supported, except
HCOPY:ABORt and
HCOPY[:IMMediate].
All the printer setting
commands are accepted,
but take no action.