dBV
Sets the unit for the selected amplitude scale (log/lin) to dBV.
Remote Command Example:
dBA
Sets the unit for the selected amplitude scale (log/lin) to dBA.
Remote Command Example:
CALibration Subsystem
The CALibration subsystem specifies the data for system error correction.
CALibration[:ALL]?
Initiates the acquisition of system error correction data.
If the acquisition was successful, "0" is returned.
Mode
Remote Command
Example
Remote Command Notes
CALibration:STATe ON | OFF
Specifies whether the current calibration data is to be taken into account by the instrument (ON) or not
(OFF).
Remote Command
Example
Remote Command Notes
Preset
State Saved
DISPlay Subsystem
The DISPLay subsystem commands control the selection and presentation of textual and graphical
information and measurement data.
This mode does not support the screen display function. All DISPlay-related SCPI commands are
accepted, but take no action and report no error.
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
UNIT:POW DBUV
UNIT:POW DBUA
All
:CALibration[:ALL]?
:CAL?
FSE, FSP, FSU
:CALibration:STATe ON|OFF|1|0
CAL:STAT OFF
FSE, FSP, FSU
ON
No
Compatible SCPI Commands
Supported SCPI Commands
105