Calculate<1|2>:Marker<1 - Agilent Technologies X Series User Manual

Compatible SCPI Commands
Supported SCPI Commands
CALCulate<1|2>:MARKer<1...4>:FUNCtion:FPEaks:COUNt?
Reads out the number of maxima found during the search. If no search has been performed, 0 is returned.
Remote Command
Example
Notes
CALCulate<1|2>:MARKer<1...4>:FUNCtion:REFerence
Sets the reference level in the selected measurement window to the power measured by the indicated
marker.
Remote Command
Example
Notes
CALCulate<1|2>:MARKer<1...4>:FUNCtion:FPEaks:X?
Reads out the list of X values of the maxima found. The number of available values can be queried with
CALC:MARK:FUNC:FPEaks:COUNt?.
Remote Command
Example
Notes
CALCulate<1|2>:MARKer<1...4>:FUNCtion:FPEaks:Y?
Reads out the list of X values of the maxima foand. The number of available values can be queried with
CALC:MARK:FUNC:FPEaks:COUNt?.
Remote Command
Example
Notes
CALCulate<1|2>:MARKer<1...4>:FUNCtion:FPEaks:SORT X|Y
Sets the sort mode for the search for maxima:
Remote Command
Example
94
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
:CALCulate[1]:MARKer[1]|2|3|4:FUNCtion:FPEaks:COUNt?
CALC:MARK:FUNC:FPE:COUN?
FSE, FSP, FSU
:CALCulate[1]:MARKer[1]|2|3|4:FUNCtion:REFerence
CALC:MARK:FUNC:REF
FSE, FSP, FSU
:CALCulate[1]:MARKer[1]|2|3|4:FUNCtion:FPEaks:X?
CALC:MARK:FUNC:FPE:X?
FSE, FSP, FSU
:CALCulate[1]:MARKer[1]|2|3|4:FUNCtion:FPEaks:Y?
CALC:MARK:FUNC:FPE:Y?
FSE, FSP, FSU
:CALCulate[1]:MARKer[1]|2|3|4:FUNCtion:FPEaks:SORT X|Y
:CALCulate[1]:MARKer[1]|2|3|4:FUNCtion:FPEaks:SORT?
CALC:MARK:FUNC:FPE:SORT X
CALC:MARK:FUNC:FPE:SORT?