[Sense<1|2>:]Power:achannel:reference:auto Once; [Sense<1|2>:]Power:achannel:reference:txchannel:auto Minimum | Maximum | Lhighest; [Sense<1|2>:]Power:achannel:reference:txchannel:manual 1 | 2 | 3 | 4 - Agilent Technologies X Series User Manual

Preset
State Saved
Range
[SENSe<1|2>:]POWer:ACHannel:REFerence:AUTO ONCE
Sets the relative measurement's reference value to the currently measured channel power.
This command is accepted, but takes no action and reports no error.
Remote Command
Example
Remote Command Notes
State Saved
[SENSe<1|2>:]POWer:ACHannel:REFerence:TXCHannel:AUTO MINimum | MAXimum |
LHIGhest
Activates the automatic selection of the transmission channel that is used as a reference channel in
relative adjacent-channel power measurements.
Remote Command
Example
Remote Command Notes
State Saved
Range
[SENSe<1|2>:]POWer:ACHannel:REFerence:TXCHannel:MANual 1 | 2 | 3 | 4
Selects the transmission channel to use as a reference channel in relative adjacent-channel power
measurements.
The command is only available for multicarrier and adjacent-channel power measurements.
Remote Command
Example
Remote Command Notes
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
ABSolute
Saved in instrument state.
ABSolute|RELative
[:SENSe]:POWer:ACHannel:REFerence:AUTO ONCE
POW:ACH:REF:AUTO ONCE
FSE, FSP, FSU
Saved in instrument state.
[:SENSe]:POWer:ACHannel:REFerence:TXCHannel:AUTO
MINimum|MAXimum|LHIGhest
[:SENSe]:POWer:ACHannel:REFerence:TXCHannel:AUTO?
SENS:POW:ACH:REF:TXCH:AUTO MIN
FSP, FSU
Saved in instrument state.
MINimum | MAXimum | LHIGhest
[:SENSe]:POWer:ACHannel:REFerence:TXCHannel:MANual 1 | 2
[:SENSe]:POWer:ACHannel:REFerence:TXCHannel:MANual?
POW:ACH:REF:TXCH:MAN 2
POW:ACH:REF:TXCH:MAN?
FSP, FSU
Compatible SCPI Commands
Supported SCPI Commands
145