Calculate<1|2>:Marker<1 - Agilent Technologies X Series User Manual

This command is an event, and therefore has no *RST value and no query.
Remote Command
Example
Remote Command Notes
CALCulate<1|2>:MARKer<1...4>:MAXimum:AUTO ON | OFF
For marker 1, the command switches on or off operation of automatic maximum peak search at the end
of each sweep.
The marker search limit settings are taken into account.
For this command, the numeric suffix <1 to 4> is ignored.
The query returns the current state of this setting.
Remote Command
Example
Remote Command Notes
Preset
State Saved
CALCulate<1|2>:MARKer<1...4>:MINimum:AUTO ON | OFF
For marker 1, the command switches on or off operation of automatic minimum peak search at the end of
each sweep.
The marker search limit settings are taken into account.
For this command, the numeric suffix <1 to 4> is ignored.
The query returns the current state of this setting.
Remote Command
Example
Remote Command Notes
Preset
State Saved
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
CALCulate[1]:MARKer[1]|2|3|4:MINimum:RIGHt
CALC:MARK:MIN:RIGH
FSE, FSP, FSU
:CALCulate[1]:MARKer[1]|2|3|4:MAXimum:AUTO ON|OFF|1|0
:CALCulate[1]: MARKer[1]|2|3|4:MAXimum:AUTO?
CALC:MARK:MAX:AUTO ON
CALC:MARK:MAX:AUTO?
FSU
OFF
Saved in instrument state.
:CALCulate[1]:MARKer[1]|2|3|4:MINimum:AUTO ON|OFF|1|0
:CALCulate[1]: MARKer[1]|2|3|4:MINimum:AUTO?
CALC:MARK:MIN:AUTO ON
CALC:MARK:MIN:AUTO?
FSU
OFF
Saved in instrument state.
Compatible SCPI Commands
Supported SCPI Commands
91