The query returns the current value of this setting.
Remote Command
Example
Remote Command Notes
Preset
State Saved
Min
Max
INPut<1|2>:ATTenuation:AUTO
The command switches between coupling of the input attenuation to the reference level (state ON), and
manual input attenuation (state OFF).
The query returns the current state of this setting.
Remote Command
Example
Remote Command Notes
Preset
State Saved
INPut<1|2>:EATT
The command specifies the setting of the electronic input attenuator.
This mode supports a maximum value of 24 dB.
The query returns the current value of this setting.
Remote Command
Example
Remote Command Notes
Preset
State Saved
Min
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
:INPut[1]:ATTenuation <rel_ampl>
:INPut[1]:ATTenuation?
INP:ATT 40dB
FSE, FSP, FSU
6dB
Saved in instrument state.
0
70
:INPut[1]:ATTenuation:AUTO ON|OFF|1|0
:INPut[1]:ATTenuation:AUTO?
INP:ATT:AUTO ON
FSP, FSU
ON
Saved in instrument state.
:INPut[1]:EATT <rel_ampl>
:INPut[1]:EATT?
INP:EATT 15dB
FSP, FSU
0
Saved in instrument state.
0
Compatible SCPI Commands
Supported SCPI Commands
119