Scpi Summary Table - Agilent Technologies X Series User Manual

Compatible SCPI Commands

SCPI Summary Table

This table is a brief summary of the FSE/FSP/FSU SCPI commands covered by the N9062A & W9062A
SCPI Language Compatibility application in the X-Series analyzers, with short notes on operation. For
more details, see
Table 3-1
SCPI Command
Abort
CALCulate<1|2>:DELTamarker<1...4>[:STATe]
ON | OFF
CALCulate<1|2>:DELTamarker<1...4>:MODE
ABSolute|RELative
CALCulate<1|2>:DELTamarker<1...4>:AOFF
CALCulate<1|2>:DELTamarker<1...4>:TRACe 1
to 3
CALCulate<1|2>:DELTamarker<1...4>:X 0 to
MAX (frequency | sweep time)
CALCulate<1|2>:DELTamarker<1...4>:X:RELati
ve?
CALCulate<1|2>:DELTamarker<1...4>:Y?
CALCulate<1|2>:DELTamarker<1...4>:MAXimu
m[:PEAK]
CALCulate<1|2>:DELTamarker<1...4>:MAXimu
m:LEFT
CALCulate<1|2>:DELTamarker<1...4>:MAXimu
m:NEXT
CALCulate<1|2>:DELTamarker<1...4>:MAXimu
m:RIGHt
CALCulate<1|2>:DELTamarker<1...4>:MINimu
m[:PEAK]
CALCulate<1|2>:DELTamarker<1...4>:MINimu
m:LEFT
CALCulate<1|2>:DELTamarker<1...4>:MINimu
m:NEXT
38
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
SCPI Summary Table
"Supported SCPI Commands" on page
SCPI Commands Summary Table
57.
Corresponding Support
Model
FSE/FSP/FSU Yes
FSE/FSP/FSU Yes
FSE/FSP/FSU Yes
FSE/FSP/FSU Yes
FSE/FSP/FSU Yes
FSE/FSP/FSU Yes
FSE/FSP/FSU Yes
FSE/FSP/FSU Yes
FSE/FSP/FSU Yes
FSE/FSP/FSU Yes
FSE/FSP/FSU Yes
FSE/FSP/FSU Yes
FSE/FSP/FSU Yes
FSE/FSP/FSU Yes
FSE/FSP/FSU Yes
Notes
All DELTamarker
functions are not supported
in CCDF and APD
measurements.
The only unit supported is
dB.