Compatible SCPI Commands
SCPI Summary Table
Table 3-1
SCPI Command
TRIGger<1|2>[:SEQuence]:LEVel:VIDeo 0 to
100PCT
TRIGger<1|2>[:SEQuence]:HOLDoff <time>
TRIGger<1|2>[:SEQuence]:SLOPe
POSitive|NEGative
a. Agilent supports up to 6 limit lines.
b. "Accepted" means this command is accepted, but takes no action and reports no error.
54
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
SCPI Commands Summary Table
Corresponding
Support
Model
FSE/FSP/FSU
Yes
FSE/FSP/FSU
Yes
FSE/FSP/FSU
Yes
Notes
Min = 0
Max = 500 ms