Input<1|2>:Gain:state; Instrument Subsystem; Instrument[:Select] Sanalyzer | Ddemod | Ademod | Mgsm | Wcdpower|Bwcdpower |Mwcdpower | Bc2K| Bdo; Instrument:nselect <Numeric Value - Agilent Technologies X Series User Manual

INPut<1|2>:GAIN:STATe
The command switches the instrument's preamplifier on or off.
The query returns the current state of this setting.
Remote Command
Example
Remote Command Notes
Preset
State Saved

INSTrument Subsystem

The INSTrument subsystem allows you to select the analyzer's operating mode.
INSTrument[:SELect] SANalyzer | DDEMod | ADEMod | MGSM | WCDPower|BWCDpower
|MWCDpower | BC2K| BDO
The command selects the analyzer's mode according to the value of a text parameter.
This mode supports a parameter set that differs from that listed above. For details, see the table of
available parameter values in the section
The query returns the current state of this setting.
Remote Command
Example
Remote Command Notes
State Saved
INSTrument:NSELect <numeric value>
The command selects the analyzer's mode according to the value of a numeric parameter.
This mode supports the parameter values listed in the table below.
Mode Identification Numbers and Strings for X-Series Analyzers:
Mode
Spectrum Analyzer
GSM
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
:INPut[1]:GAIN:STATe ON|OFF|1|0
:INPut[1]:GAIN:STATe?
INP:GAIN:STAT ON
FSP, FSU
OFF
Saved in instrument state.
"INSTrument:NSELect <numeric value>" on page
:INSTrument[:SELect] <string>
:INSTrument[:SELect]?
:INST:SEL SA
FSE, FSP, FSU
Saved in instrument state.
:INSTrument:NSELect :INSTrument[:SELect]
<integer> <parameter>
1 SA
3 GSM
Compatible SCPI Commands
Supported SCPI Commands
121.
121