Calculate<1|2>:Deltamarker<1 - Agilent Technologies X Series User Manual

Remote Command Notes
Preset
State Saved
Range
CALCulate<1|2>:DELTamarker<1...4>:AOFF
Switches off all active delta markers.
Remote Command
Example
Remote Command Notes
CALCulate<1|2>:DELTamarker<1...4>:TRACe <1...3>
Assigns the specified delta marker to the specified trace.
Remote Command
Example
Remote Command Notes
Preset
State Saved
Min
Max
CALCulate<1|2>:DELTamarker<1...4>:X<0...MAX>(frequency | sweep time)
The command positions the specified delta marker at the indicated frequency (span > 0) or time (span =
0).
The query returns the current value of this parameter.
Remote Command
Example
Remote Command Notes
CALCulate<1|2>:DELTamarker<1...4>:X:RELative?
Queries the frequency or time value of the specified delta marker, relative to marker 1, or to the reference
position (for CALCulate:DELTamarker:FUNCtion:FIXed:STATe ON). If required, the corresponding
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
FSE, FSP, FSU
RELative
Saved in instrument state.
ABSolute | RELative
:CALCulate[1]:DELTamarker[1]|2|3|4:AOFF
CALC:DELT:AOFF
FSE, FSP, FSU
:CALCulate[1]:DELTamarker[1]|2|3|4:TRACe 1|2|3
CALC:DELT:TRAC 1
FSE, FSP, FSU
1
Saved in instrument state.
1
3
:CALCulate[1]:DELTamarker[1]|2|3|4:X <real>
:CALCulate[1]:DELTamarker[1]|2|3|4:X?
CALC:DELT:X 10.7MHz
CALC:DELT:X?
FSE, FSP, FSU
Compatible SCPI Commands
Supported SCPI Commands
61