System:error; System:error:list; System:error:clear:all; System:preset - Agilent Technologies X Series User Manual

SYSTem:ERRor?

Queries the first (oldest) entry in the error queue, then deletes that entry.
Remote Command
Example
Remote Command Notes

SYSTem:ERRor:LIST?

This command is accepted, but takes no action and reports no error.
Remote Command
Example
Remote Command Notes

SYSTem:ERRor:CLEar:ALL

This command is accepted, but takes no action and reports no error.
Remote Command
Example
Remote Command Notes

SYSTem:PRESet

Initiates a reset of the analyzer.
Remote Command
Example
Remote Command Notes

SYSTem:TIME

Sets or queries the time portion of the analyzer's internal clock. The sequence of entry is hour, minute,
second.
Remote Command
Example
Remote Command Notes
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
:SYSTem:ERRor[:NEXT]?
:SYST:ERR?
FSE, FSP, FSU
:SYSTem:ERRor:LIST?
:SYST:ERR:LIST?
FSP, FSU
:SYSTem:ERRor:CLEar:ALL
:MMEM:CLE:ALL
FSP, FSU
:SYSTem:PRESet
:SYST:PRES
FSE, FSP, FSU
:SYSTem:TIME <hour>,<minute>,<second>
:SYSTem:TIME?
:SYST:TIME 13,05,26
FSE, FSP, FSU
Compatible SCPI Commands
Supported SCPI Commands
159