Agilent Technologies X Series User Manual page 171

A Brief Introduction to the SCPI Language
Overview
Units
Variable
170
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
Numeric variables may include units. The valid units for a command depend on the
variable type being used. See the following variable descriptions. The indicated
default units are used if no units are sent. Units can follow the numerical value with,
or without, a space.
A variable can be entered in exponential format as well as standard numeric format.
The appropriate range of the variable and its optional units are defined in the
command description.
The following keywords may also be used in commands, but not all commands allow
keyword variables.
• DEFault - resets the parameter to its default value.
• UP - increments the parameter.
• DOWN - decrements the parameter.
• MINimum - sets the parameter to the smallest possible value.
• MAXimum - sets the parameter to the largest possible value.
The numeric value for the function's MINimum, MAXimum, or DEFault can be
queried by adding the keyword to the command in its query form. The keyword must
be entered following the question mark.
Example query: SENSE:FREQ:CENTER? MAX