Sense:detector Subsystem; [Sense<1|2>:]Detector<1; Qpeak; [Sense<1|2>:]Detector<1 To 3>[:Function]:Auto On | Off - Agilent Technologies X Series User Manual

Notes
Preset
State Saved

SENSe:DETector Subsystem

The SENSe:DETector subsystem controls measurement data acquisition via selection of the detector for
the corresponding trace.
[SENSe<1|2>:]DETector<1..3>[:FUNCtion] APEak | NEGative | POSitive | SAMPle | RMS
|AVERage | QPEak
Switches on the data acquisition detector in the selected trace.
Remote Command
Example
Remote Command Notes
Remote Command Notes
Preset
State Saved
Range
Backwards Compatibility SCPI
[SENSe<1|2>:]DETector<1 to 3>[:FUNCtion]:AUTO ON | OFF
Either couples the detector to the current trace setting or turns coupling off.
Remote Command
Example
Remote Command Notes
Preset
State Saved
Backwards Compatibility SCPI

SENSe:FREQuency Subsystem

The SENSe:FREQuency subsystem specifies the active display's frequency axis. The frequency axis can
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
FSU, FSP, FSE
OFF
Saved in instrument state.
[:SENSe]:DETector[1]|2|3[:FUNCtion]
APEak|NEGative|POSitive|SAMPle|RMS|AVERage|QPEak
[:SENSe]:DETector[1]|2|3[:FUNCtion]?
DET POS
FSE, FSP, FSU
APEak
Saved in instrument state.
APEak | NEGative | POSitive | SAMPle | RMS | AVERage | QPEak
:SENSe1:DETector[1]|2|3[:FUNCtion]
[:SENSe]:DETector[1]|2|3[:FUNCtion]:AUTO ON|OFF|1|0
[:SENSe]:DETector[1]|2|3[:FUNCtion]:AUTO?
DET:AUTO OFF
FSE, FSP, FSU
ON
Saved in instrument state.
:SENSe1:DETector[1]|2|3[:FUNCtion]:AUTO
Compatible SCPI Commands
Supported SCPI Commands
137