[Sense<1|2>:]Correction:transducer:scaling Linear | Logarithmic; [Sense<1|2>:]Correction:transducer:comment <String; [Sense<1|2>:]Correction:transducer:data <Freq>,<Level - Agilent Technologies X Series User Manual

Notes
Remote Command Notes
State Saved
[SENSe<1|2>:]CORRection:TRANsducer:SCALing LINear | LOGarithmic
Specifies whether the frequency scaling of the transducer factor is linear or logarithmic.
Remote Command
Example
Notes
Preset
State Saved
[SENSe<1|2>:]CORRection:TRANsducer:COMMent <string>
This command defines the comment for the selected transducer factor.
Currently, this command support 6 correction settings.
Remote Command
Example
Notes
State Saved
[SENSe<1|2>:]CORRection:TRANsducer:DATA <freq>,<level>..
Specifies the reference values of the transducer factor selected. These values are
entered as a sequence of frequency/level pairs. The frequencies must be sent in ascending order.
Currently, this command support 6 correction settings.
Remote Command
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
This command won't invoke any action and the default value in the system is
always "DB".
FSU, FSP, FSE
Currently, this command support 6 correction settings.
Saved in instrument state.
[:SENSe]:CORRection:TRANsducer:SCALing
LINear|LOGarithmic
[:SENSe]:CORRection:TRANsducer:SCALing?
CORR:TRAN:SCAL LIN
CORR:TRAN:SCAL?
FSU, FSP, FSE
LINear
Saved in instrument state.
[:SENSe]:CORRection:TRANsducer:COMMent <string>
[:SENSe]:CORRection:TRANsducer:COMMent?
CORR:TRAN:COMM "NA"
CORR:TRAN:COMM?
FSU, FSP, FSE
Saved in instrument state.
[:SENSe]:CORRection:TRANsducer:DATA
<freq_real>,<level_real>,...
[:SENSe]:CORRection:TRANsducer:DATA?
Compatible SCPI Commands
Supported SCPI Commands
135