Calculate<1|2>:Limit<1 - Agilent Technologies X Series User Manual

Compatible SCPI Commands
Supported SCPI Commands
Example
Notes
Preset
State Saved
CALCulate<1|2>:LIMit<1...6>:ACPower:ACHannel:ABSolute:STATe
Invokes the limit check for the adjacent channel when ACP measurement is performed. Before the
command, the limit check for the channel/adjacent-channel measurement must be globally switched on
using CALC:LIM:ACP ON.
The result can be queried with CALCulate:LIMit:ACPower:ACHannel:RESult?. A complete
measurement must be performed between switching on the limit check and the result query, since
otherwise no valid results are available.
The numeric suffix in LIMIt is irrelevant for this command.
Remote Command
Example
Notes
Preset
State Saved
CALCulate<1|2>:LIMit<1...6>:ACPower:ACHannel:RESult?
Queries the result of the limit check for the upper/lower adjacent channel in the selected measurement
window when ACP measurement is performed.
If the power measurement of the adjacent channel is switched off, the command produces a query error.
The numeric suffix is irrelevant for this command.
The result is returned in the form <result>, <result> where <result> = PASSED | FAILED, and where the
first returned value denotes the lower, the second denotes the upper adjacent channel.
Remote Command
Example
Notes
74
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
CALC:LIM:ACP:ACH:ABS 30DBM, 30DBM
CALC:LIM:ACP:ACH:ABS?
FSU, FSP, FSE
–200dBm, –200dBm
Saved in instrument state.
:CALCulate[1]:LIMit[1]|2|3|4|5|6:ACPower:ACHannel:ABSol
ute:STATe ON|OFF|1|0
:CALCulate[1]:LIMit[1]|2|3|4|5|6:ACPower:ACHannel:ABSol
ute:STATe?
CALC:LIM:ACP:ACH:ABS:STAT ON
CALC:LIM:ACP:ACH:ABS:STAT?
FSU, FSP, FSE
OFF
Saved in instrument state.
:CALCulate[1]:LIMit[1]|2|3|4|5|6:ACPower:ACHannel:RESul
t?
CALC:LIM:ACP:ACH:RES?
FSU, FSP, FSE