Calculate<1|2>:Limit<1 - Agilent Technologies X Series User Manual

Compatible SCPI Commands
Supported SCPI Commands
The query returns the current value of this string.
Remote Command
Example
Remote Command Notes
Preset
State Saved
CALCulate<1|2>:LIMit<1...6>:COPY 1 to 6 | <name>
Copies the limit line specified by the numeric suffix of LIMit onto the limit line specified by the
command's parameter.
This mode does not support the parameter option <name>.
Remote Command
Example
Remote Command Notes
Min
Max
CALCulate<1|2>:LIMit<1...6>:NAME <name of limit line>
The command assigns a name to the limit line specified by the numeric suffix of LIMit. A limit line with
this name is created, if it does not already exist.
The query returns the current value of this string.
Remote Command
Example
Remote Command Notes
Preset
State Saved
70
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
:CALCulate[1]:LIMit[1]|2|3|4|5|6:COMMent <string>
:CALCulate[1]:LIMit[1]|2|3|4|5|6:COMMent?
CALC:LIM:COMM 'GSM2'
CALC:LIM:COMM?
FSE, FSP, FSU
""
Saved in instrument state.
:CALCulate[1]:LIMit[1]|2|3|4|5|6:COPY <int>
CALC:LIM:COPY 2
FSE, FSP, FSU
1
6
:CALCulate[1]:LIMit[1]|2|3|4|5|6:NAME <string>
:CALCulate[1]:LIMit[1]|2|3|4|5|6:NAME?
CALC:LIM:NAME 'test'
CALC:LIM:NAME?
FSE, FSP, FSU
'REM1' to 'REM6' for lines 1 to 6
Saved in instrument state.