Calculate<1|2>:Limit<1 - Agilent Technologies X Series User Manual

The query returns the current state of this setting.
Remote Command
Example
Remote Command Notes
Preset
State Saved
Range
CALCulate<1|2>:LIMit<1...6>:FAIL?
Returns the limit check result for the specified limit line.
To obtain a valid result, you must perform a complete sweep.
The numeric value returned has the following meaning:
0
1
2
Remote Command
Example
Remote Command Notes
Min
Max
CALCulate<1|2>:LIMit<1...6>:CLEar[:IMMediate]
Deletes the current limit check result for all limit lines.
Remote Command
Example
Remote Command Notes
CALCulate<1|2>:LIMit<1...6>:COMMent <string>
The command defines a comment for the specified limit line. The comment string may have a maximum
length of 40 characters.
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
:CALCulate[1]:LIMit[1]|2|3|4|5|6:UNIT
DBM|DBUV|DBMV|DBUA|A|V|W
:CALCulate[1]:LIMit[1]|2|3|4|5|6:UNIT?
CALC:LIM:UNIT DBM
CALC:LIM:UNIT?
FSE, FSP, FSU
DBM
Saved in instrument state.
DBM | DBUV | DBMV | DBUA | A | V | W
PASS
FAIL
MARGIN
:CALCulate[1]:LIMit[1]|2|3|4|5|6:FAIL?
CALC:LIM:FAIL?
FSE, FSP, FSU
0
2
:CALCulate[1]:LIMit[1]|2|3|4|5|6:CLEar[:IMMediate]
CALC:LIM:CLE
FSE, FSP, FSU
Compatible SCPI Commands
Supported SCPI Commands
69