Mmemory:data <File_Name>[,<Block_Data>]; Mmemory:delete <File_Name; Mmemory:initialize <Msus; Mmemory:load:state 1,<File_Name - Agilent Technologies X Series User Manual

Compatible SCPI Commands
Supported SCPI Commands
Example
Remote Command Notes
MMEMory:DATA <file_name>[,<block_data>]
The command writes the data block <block_data> from the control computer into the file specified by
<file_name> (in the analyzer).
The query transfers the file specified by <file_name> from the analyzer to the control computer.
Remote Command
Example
Remote Command Notes
State Saved
MMEMory:DELete <file_name>
Deletes the file specified by <file_name>.
Remote Command
Example
Remote Command Notes
MMEMory:INITialize <msus>
This command is accepted, but takes no action and reports no error.
Remote Command
Example
Remote Command Notes
MMEMory:LOAD:STATe 1,<file_name>
Loads device settings from the file specified by <file_name>. The file contents are set as the new
analyzer state.
Remote Command
Example
Remote Command Notes
124
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
:MMEM:COPY 'C:\test.txt' 'D:'
FSE, FSP, FSU
:MMEMory:DATA <string>[,<block_data>]
:MMEMory:DATA? <string>
:MMEM:DATA 'TEST.CFG',#217This is the file
:MMEM:DATA? 'TEST.CFG'
FSE, FSP, FSU
Saved in instrument state.
:MMEMory:DELete <string >
:MMEM:DEL 'C:\test.txt'
FSE, FSP, FSU
:MMEMory:INITialize <string >
:MMEM:INIT 'A:'
FSE, FSP, FSU
:MMEMory:LOAD:STATe 1,<string>
:MMEM:LOAD:STAT 1,'myState.state'
FSE, FSP, FSU