Trigger<1|2>[:Sequence]:Level:video 0 To 100Pct; Trigger<1|2>[:Sequence]:Holdoff - Agilent Technologies X Series User Manual

This mode supports the level range:–200 to 100 dBm.
Remote Command
Example
Remote Command Notes
Preset
State Saved
Min
Max
TRIGger<1|2>[:SEQuence]:LEVel:VIDeo 0 to 100PCT
Sets the video trigger level.
Remote Command
Example
Remote Command Notes
Preset
State Saved
Min
Max
TRIGger<1|2>[:SEQuence]:HOLDoff
Specifies the trigger delay period.
Remote Command
Example
Remote Command Notes
Preset
State Saved
Min
Max
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
:TRIGger[1][:SEQuence]:LEVel:RFPower <real>
:TRIGger[1][:SEQuence]:LEVel:RFPower?
TRIG:LEV:RFP –20DBM
FSP
–20dBm
Saved in instrument state.
–200dBm
100dBm
TRIGger[1][:SEQuence]:LEVel:VIDeo <real>
TRIGger[1][:SEQuence]:LEVel:VIDeo?
TRIG:LEV:VID 40
TRIG:LEV:VID?
FSE, FSP, FSU
50
Saved in instrument state.
0
100
:TRIGger[1][:SEQuence]:HOLDoff <time>
:TRIGger[1][:SEQuence]:HOLDoff?
TRIG:HOLD 100ms
FSE, FSP, FSU
0s
Saved in instrument state.
0s
0.5s
Compatible SCPI Commands
Supported SCPI Commands
163