Display[:Window<1|2>]:Trace<1 To 3>:Y[:Scale]:Rlevel; Display[:Window<1|2>]:Trace<1 To 3>:Y[:Scale]:Rlevel:offset - Agilent Technologies X Series User Manual

This command is accepted, but takes no action and reports no error.
Remote Command
Example
Remote Command Notes
Preset
State Saved
Range
Backwards Compatibility SCPI
DISPlay[:WINDow<1|2>]:TRACe<1 to 3>:Y[:SCALe]:RLEVel
The command specifies the reference level.
The query returns the current value of this setting.
Remote Command
Example
Remote Command Notes
Preset
State Saved
Min
Max
Backwards Compatibility SCPI
DISPlay[:WINDow<1|2>]:TRACe<1 to 3>:Y[:SCALe]:RLEVel:OFFSet
The command specifies the offset of the reference level.
The query returns the current value of this setting.
Remote Command
Example
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
:DISPlay:WINDow[1]:TRACe:Y[:SCALe]:MODE
ABSolute|RELative
:DISPlay:WINDow[1]:TRACe:Y[:SCALe]:MODE?
DISP:WIND:TRAC:Y:MODE ABS
DISP:WIND:TRAC:Y:MODE?
FSE, FSP, FSU
ABS
Saved in instrument state.
ABSolute | RELative
:DISPlay[1]:TRACe[1]|2|3:Y[:SCALe]:MODE
:DISPlay:WINDow[1]:TRACe[1]|2|3:Y[:SCALe]:RLEVel <ampl>
:DISPlay:WINDow[1]:TRACe[1]|2|3:Y[:SCALe]:RLEVel?
DISP:TRAC:Y:RLEV 20dBm
FSE, FSP, FSU
–20 dBm
Saved in instrument state.
–130 dBm
30 dBm
:DISPlay:TRACe[1]|2|3:Y[:SCALe]:RLEVel
:DISPlay:WINDow[1]:TRACe[1]|2|3:Y[:SCALe]:RLEVel:OFFSet
<rel_ampl>
:DISPlay:WINDow[1]:TRACe[1]|2|3:Y[:SCALe]:RLEVel:OFFSet
?
DISP:TRAC:Y:RLEV:OFFS –10dB
Compatible SCPI Commands
Supported SCPI Commands
111