Calculate<1|2>:Marker<1 - Agilent Technologies X Series User Manual

Remote Command Notes
Preset
Min
Max
CALCulate<1|2>:MARKer<1...4>:COUNt:FREQuency?
Queries the frequency counter result for the specified marker.
Remote Command
Example
Remote Command Notes
CALCulate<1|2>:MARKer<1...4>:LOEXclude ON | OFF
The command switches local oscillator suppression for peak search on or off.
This setting is valid for all markers and delta markers.
The query returns the current state of this setting.
Remote Command
Example
Remote Command Notes
Preset
State Saved
CALCulate<1|2>:MARKer<1...4>:Y?
Queries the measured value of the specified marker.
If required, the marker is activated, or switched to marker mode.
Remote Command
Example
Remote Command Notes
CALCulate<1|2>:MARKer<1...4>:Y:PERCent
This command positions the selected marker in the selected window to the given probability. If marker 2,
3 or 4 is selected and used as a delta marker, it is switched to marker mode.
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
FSE, FSP, FSU
1KHZ
1
10KHz
:CALCulate[1]:MARKer[1]|2|3|4:COUNt:FREQuency?
CALC:MARK:COUN:FREQ?
FSE, FSP, FSU
:CALCulate[1]:MARKer[1]|2|3|4:LOEXclude ON|OFF|1|0
:CALCulate[1]:MARKer[1]|2|3|4:LOEXclude?
CALC:MARK:LOEX ON
FSE, FSP, FSU
ON
Saved in instrument state.
:CALCulate[1]:MARKer[1]|2|3|4:Y?
CALC:MARK2:Y 1
FSE, FSP, FSU
Compatible SCPI Commands
Supported SCPI Commands
89