R&S Fse; R&S Fsp; R&S Fsu; Mode Idn Response - Agilent Technologies X Series User Manual

Compatible SCPI Commands
Supported SCPI Commands
Range
Initial S/W Revision
R&S FSE
Selects emulation of the R&S FSE.
Key Path
Example
Initial S/W Revision
R&S FSP
Selects emulation of the R&S FSP.
Key Path
Example
Initial S/W Revision
R&S FSU
Selects emulation of the R&S FSU.
Key Path
Example
Initial S/W Revision

Mode IDN Response

The command allows you to set or query the Mode IDN Response type.
This setting affects the response string of "*IDN?", and the whole SCPI tree, according to the current
selection.
The query returns the current state of this setting.
Key Path
Remote Command
Example
State Saved
Range
58
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
FSE | FSP| FSU
A.06.00 or later
Mode Setup, Compatibility Mode
RLC:TYPE FSE
A.06.00 or later
Mode Setup, Compatibility Mode
RLC:TYPE FSP
A.06.00 or later
Mode Setup, Compatibility Mode
RLC:TYPE FSU
A.06.00 or later
Mode Setup
[:SENSe]:RLC:IDN:TYPE SYSTem|COMPatibility|USER
[:SENSe]:RLC:IDN:TYPE?
SENS:RLC:IDN:TYPE SYSTem
RLC:IDN:TYPE?
Saved in instrument state.
SYSTem | COMPatibility | USER