Alternatively, you can select the desired response using the following SCPI command.
Key Path:
Remote Command:
Example:
State Saved:
Range:
Initial S/W Revision:
Compatibility Model
Sets the response to *IDN command as the emulated instrument, like
Rohde&Schwarz,FSP-26,123456/789,04.00.
Key Path:
Example:
Initial S/W Revision:
System IDN Response
Sets the response to *IDN command as the analyzer system, like "N9020A".
Key Path:
Example:
Initial S/W Revision:
User IDN Response
Allows you to set or get the user-defined mode IDN response.
If you don't enter anything, the system IDN response will be used instead.
Key Path:
Remote Command:
Example:
State Saved:
Initial S/W Revision:
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
Mode Setup
[:SENSe]:RLC:IDN:TYPE SYSTem|COMPatibility|USER
[:SENSe]:RLC:IDN:TYPE?
SENS:RLC:IDN:TYPE SYSTem
RLC:IDN:TYPE?
Saved in instrument state.
SYSTem | COMPatibility | USER
A.06.00 or later
Mode Setup, Mode IDN Response
RLC:IDN:TYPE COMP
A.06.00 or later
Mode Setup, Mode IDN Response
RLC:IDN:TYPE SYST
A.06.00 or later
Mode Setup
[:SENSe]:RLC:IDN:USER <string>
[:SENSe]:RLC:IDN:USER?
RLC:IDN:USER "abc"
RLC:IDN:USER?
Saved in instrument state.
A.06.00 or later
Front Panel Operations
Mode Setup
33